斜拉索对钢管混凝土桁式组合拱桥力学性能的影响

位于湖南省永连公路上的天子山大桥是目前世界上第一座钢管混凝土桁式组合拱桥,其设计上的一个创新是用斜拉索代替了原来的刚性斜杆.制作了天子山大桥1∶20的铝合金模型,用模态分析的方法对钢管混凝土桁式组合拱桥的动力特性进行了研究,探讨了斜拉索对钢管混凝土桁式组合拱桥力学性能的影响.     

预应力混凝土先简支后连续梁静、动力试验研究

简要介绍预应力混凝土先简支后连续梁1∶5模型设计、试验方法。根据弹性试验、开裂试验和破坏试验结果,研究分析该类结构的工艺特点、正常使用荷载作用下结构受力变形特征、结构特别是湿接缝截面的抗裂性、开裂区域裂缝发展分布规律以及结构极限承载力。在对模型梁体系转换前、后和先简支后连续梁破坏前、后动力测试与理论分析的基础上,校核模型梁的刚度、制作精度,最后初步探讨了先简支后连续梁的动力性能。     

振荡压实对桥梁结构物的影响研究

振荡压实是利用在材料厂中产生的快速交变剪应力使材料的颗粒重新排列而变得更加密实。通过振荡压实与振动压实对桥梁结构的振动的对比试验，分析了这2种作业方式对桥梁结构物的影响．论证了振荡压路机在桥梁压实中的优越性。     

多车道高速公路出口开口段安全特性分析

为研究不同断面形式下的多车道高速公路出口影响区开口长度及流量与交通安全的关系，针对2种断面形式的高速公路出口，分别设计了3种不同的开口长度，结合3种不同流量条件设计了18个不同的驾驶模拟场景。实验招募30名被试者开展模拟驾驶实验，提取不同开口长度及流量条件下各断面形式高速公路出口的车辆行驶轨迹、换道间隙的选择、减速度、最小 TTC (Time to Collision)等驾驶行为特性参数，综合分析基于驾驶行为数据对不同开口长度的行车风险。结果表明：两种断面形式下，开口长度对于车辆在开口段上的换道点选择存在显著影响；两种断面形式下，1500 m的开口长度能够满足绝大多数驾驶人的换道需求；在换道间隙选择中，大都集中在5~6 s，分离式断面下的开口长度对于低于临界间隙的换道间隙出现的频次具有显著影响；流量及开口长度对于最大减速度及TTC最小值和分布位置均不存在显著性影响，但分离式断面下的最大减速度和最小TTC相较于整体式断面更小；此外，整体式断面中内侧3车道的行车风险低于分离式断面，分离式断面中外侧车道的行车风险低于整体式断面。     

西南红层软岩地区铁路滑坡形成机理分析及治理措施

红层软岩地区铁路工程建设中滑坡问题突出。本文结合西南地区一铁路红层滑坡治理工程,利用该地区红层滑坡的现场调查结果,从红层软岩特性、地层岩性、地质地貌、水文地质条件、深孔位移监测数据等多方面对该地区铁路滑坡形成机理进行分析,并论述红层滑坡与一般滑坡的不同点,分析红层软岩岩体力学特性、地层主要成分以及红层软岩中的粉砂质泥岩在不同风化程度下的力学特性。根据分析结果提出治理措施,并对治理措施进行评价。总结得出地层岩性、地质水文、人为因素是导致红层滑坡病害发生的主要因素。     

迎浪规则波中小水线面双体船纵向运动及波浪载荷非线性特性数值分析

基于RANS方程和VOF模型求解船体粘性兴波流场,开展了小水线面双体船(Small Waterplane Area Twin Hulls,SWATH)迎浪规则波中纵向运动及波浪载荷的非线性特性研究.通过数值计算结果与模型试验结果的对比分析,验证了文中方法的有效性;在此基础上,较为系统地分析了SWATH船的垂荡及纵摇运动响应、垂向加速度和波浪载荷的一阶及二阶量随入射波高的变化规律,指出SWATH船的运动响应及载荷与波高存在非线性的关系,尤其体现在响应共振区附近;相比于船体垂荡和纵摇运动,垂向加速度及波浪载荷的非线性特性更为显著.     

Changes in fuel economy: An analysis of the Spanish car market

This paper estimates the role that technological change and car characteristics have played in the rate of fuel consumption of vehicles over time. Using data from the Spanish car market from 1988 to 2013, we estimate a reduced form equation that relates fuel consumption with a set of car characteristics. The results for the sales-weighted sample of vehicles show that energy efficiency would have improved by 30% and 42% for petrol and diesel cars respectively had car characteristics been held constant at 1988 values. However, the shift to bigger and more fuel-consuming cars reduced the gains from technological progress. Additionally, using the results of the fuel equation we show that, besides a natural growth rate of 1.1%, technological progress is affected by both the international price of oil and the adoption of mandatory emission standards. Moreover, according to our estimations, a 1% growth in GDP would modify car characteristics in such a way that fuel consumption would increase by around 0.23% for petrol cars and 0.35% for diesel cars.     

海流能轮机叶片翼型的水动力学特性模拟

基于卧式海流能发电装置,采用雷诺平均N-S方程,对来流攻角从0°~26°情形下的叶片翼型进行数值模拟,分析比较不同攻角下水动力学特性的变化规律。结果表明:一定范围内增加攻角可有效提高升阻比,但升力系数最大时,升阻比、水翼捕能效率不一定最高,失速角也不一定是最佳攻角,验证了水翼失速的根本原因是边界层的分离;水翼吸力面与压力面的压差较大,此压差为水翼提供较高的升力系数,主要来自于水翼的前半部。此外,还分析了水翼周围流场的速度分布、压力分布等水动力特性与攻角的关系,为设计高效的海流能转换叶片提供了理论参考。     

Driving cycle prediction model based on bus route features

Bus fuel economy is deeply influenced by the driving cycles, which vary for different route conditions. Buses optimized for a standard driving cycle are not necessarily suitable for actual driving conditions, and, therefore, it is critical to predict the driving cycles based on the route conditions. To conveniently predict representative driving cycles of special bus routes, this paper proposed a prediction model based on bus route features, which supports bus optimization. The relations between 27 inter-station characteristics and bus fuel economy were analyzed. According to the analysis, five inter-station route characteristics were abstracted to represent the bus route features, and four inter-station driving characteristics were abstracted to represent the driving cycle features between bus stations. Inter-station driving characteristic equations were established based on the multiple linear regression, reflecting the linear relationships between the five inter-station route characteristics and the four inter-station driving characteristics. Using kinematic segment classification, a basic driving cycle database was established, including 4704 different transmission matrices. Based on the inter-station driving characteristic equations and the basic driving cycle database, the driving cycle prediction model was developed, generating drive cycles by the iterative Markov chain for the assigned bus lines. The model was finally validated by more than 2 years of acquired data. The experimental results show that the predicted driving cycle is consistent with the historical average velocity profile, and the prediction similarity is 78.69%. The proposed model can be an effective way for the driving cycle prediction of bus routes.     

上游静止柱体对圆柱体结构尾激振动的影响

文章运用半隐式特征线分裂算子有限元算法对串列布置的静止上游柱体和下游圆柱的尾激振动问题进行了数值模拟研究。数值结果表明:上游柱体结构的形状、尺寸比(d/D)和折减速度(Ur)三个参数对下游圆柱体结构的动力响应、运动轨迹与涡脱落模态有着显著的影响,且与单圆柱工况相比存在明显区别;随着尺寸比的增大,上/下游柱体结构之间的互扰作用会由流致效应逐渐转变为尾流效应,使得频率特性发生变化,并会导致下游圆柱体结构的振动响应增强;当d/D=0.5和1.0时,下游圆柱体结构的运动轨迹主要为“8”字形;当d/D=1.5时,除了“8”字形外,运动轨迹还会呈现双弯刀形、“双8”字形和不规则形状。通过对流体力系数与位移时程曲线及位移PSD曲线特性进行分析,揭示了其相互作用的内在机理。另外,下游圆柱体结构的尾流场特性也会随参数的变化而变化,其涡脱落模态主要为2S、P+S和2P三种。